Environmental requirements and installation techniques for fan wet curtains
Wet curtain fan, also known as evaporative cooler, is an evaporative cooling ventilator that combines cooling, ventilation, dust, and deodorization. It has an important feature ---- energy saving, environmental protection! It is a new environmentally friendly product with no compressor, no refrigerant, no copper tube. The wet curtain fan is also called an air cooler in the cold storage: it is mostly a complete set of equipment consisting of an axial fan and a cooling pipe. The wet curtain fan relies on the air in the strong refrigeration warehouse of the fan to flow through the cooling pipe in the cabinet to exchange heat, so that the air is cooled, so as to reduce the temperature of the warehouse.
Environmental requirements:
1. For curtain fan design and installation staff can not be sloppy treatment, if the indoor window is high from the ground, then the wet curtain distance should use the best distance of negative pressure vertical ventilation, fan and wet curtain installed in Both ends.
2. When there is a work room at one end of the room, the wet curtain cannot be installed on the wall of one end. Then the wet curtain can be installed on the adjacent side wall of the room, and the fan is installed on the opposite wall. Corner line installation.
3. When the distance between the gables in the workshop is too long and the distance of the fan's ventilation does not reach the desired effect, lateral ventilation may be used to reduce the resistance loss, that is, the fan and the wet curtain are installed in groups.
4. The arrangement of the wet curtain is generally selected at the upper air outlet, and the fan is arranged at the lower air outlet. The air inlet of the wet curtain must have sufficient air intake space.
5. It is advisable to configure 6-8 square curtains for one fan and distribute them evenly.
6. The negative pressure fan and the wet curtain are embedded. The location of the fan and the wet curtain is reserved on the wall of the house.
Installation tips:
Wet curtain fan is a very good cooling device, and it has been recognized by many customers nowadays. For the installation of wet curtain fan, professional installation is required. The installation can be related to the effect of cooling afterwards.
1. First, we must check if there is any damage during transportation and avoid water leakage.
2. Use a paired external PVC pipe when installing. The water pressure is not enough and the water pressure is too large.
3, After installation, water transfer is the key, not too big or too small. If it is big, it will lead to water leakage. If the wet curtain fan is small, the humidity will not be enough and the cooling effect will not be achieved.